diff --git a/AGENTS.md b/AGENTS.md
index 2f831555..0ca3f1a1 100644
--- a/AGENTS.md
+++ b/AGENTS.md
@@ -46,7 +46,7 @@
 
 正確動作是 AI 自動補齊 target selector、source-of-truth diff、check-mode / dry-run、rollback、post-apply verifier、KM / PlayBook trust writeback，然後推進可驗證、可回滾、低爆炸半徑的實作。
 
-**110 runner / direct CD lane 壓力事故例外**：Gitea / act-runner / direct transient runner / direct CD lane 對 110 造成 CPU / headless smoke / Docker build 壓力時，屬事故級容量保護，不得用「全面授權」直接重開 runner、移除 mask、還原 runner / cd-lane binary、用 `systemd-run` 直啟 `.real` binary，或把 host pressure gate 改成 warn-only。正確動作是先做 runner / CD lane 搬遷、限流、label isolation、smoke 排程，再以 check-mode、rollback 與 post-apply verifier 受控恢復。
+**110 runner / controlled CD lane 壓力事故例外**：Gitea / act-runner / direct transient runner 對 110 造成 CPU / headless smoke / Docker build 壓力時，屬事故級容量保護，不得用「全面授權」直接重開 legacy runner、移除 legacy mask、還原 legacy runner binary、用 `systemd-run` 直啟 `.real` binary，或把 host pressure gate 改成 warn-only。專用 `awoooi-cd-lane.service` 只能在獨立 sentinel、`capacity=1`、窄 label、rollback unit 與 post-apply verifier 成立時受控開啟；正確動作是分流 legacy runner 與 controlled cd-lane，不得一把梭恢復泛用 runner。
 
 ---
 
diff --git a/docs/HARD_RULES.md b/docs/HARD_RULES.md
index 28a16774..5758f7dd 100644
--- a/docs/HARD_RULES.md
+++ b/docs/HARD_RULES.md
@@ -289,9 +289,9 @@ force push / 刪 repo / 刪 refs / 改 repo visibility / raw runtime secret volu
 
 ### 110 runner / direct CD lane 壓力事故例外
 
-2026-06-28 事故後，110 上的 Gitea / act-runner / direct transient runner / direct CD lane、StockPlatform headless smoke、host-side Next build 與 Docker / BuildKit 壓力屬容量事故保護面。即使收到「批准 / 繼續 / 全面授權」，也不得直接重開 runner、解除 service mask、還原 live runner / cd-lane binary、用 `systemd-run` 直啟 `.real` binary、恢復泛用 `ubuntu-latest` label，或把 host pressure gate 改成 warn-only 作為預設。
+2026-06-28 事故後，110 上的 Gitea / act-runner / direct transient runner、StockPlatform headless smoke、host-side Next build 與 Docker / BuildKit 壓力屬容量事故保護面。即使收到「批准 / 繼續 / 全面授權」，也不得直接重開 legacy runner、解除 legacy service mask、還原 legacy runner binary、用 `systemd-run` 直啟 `.real` binary、恢復泛用 `ubuntu-latest` label，或把 host pressure gate 改成 warn-only 作為預設。
 
-允許的 controlled apply 是降壓與防再發：停止 / disable / mask runner、mask direct transient / direct CD lane unit、quarantine runner / cd-lane binary、收斂 labels、補 source fail-closed guard、搬遷 runner / CD lane、限制 concurrency、把 smoke 改成排程 / 非 110 runner，以及執行只讀 pressure / cold-start verifier。
+允許的 controlled apply 是降壓與防再發：停止 / disable / mask legacy runner、mask direct transient unit、quarantine legacy runner binary、收斂 labels、補 source fail-closed guard、搬遷 runner、限制 concurrency、把 smoke 改成排程 / 非 110 runner，以及執行只讀 pressure / cold-start verifier。專用 `awoooi-cd-lane.service` 可在獨立 sentinel、`capacity=1`、無 `ubuntu-latest` / StockPlatform / headless / Playwright label、可回滾 unit、post-apply verifier 都成立時受控開啟；verifier 必須把它與 legacy runner 分開判讀。
 
 恢復 runner 必須同時具備：
 
diff --git a/docs/LOGBOOK.md b/docs/LOGBOOK.md
index d5797708..ebc7e682 100644
--- a/docs/LOGBOOK.md
+++ b/docs/LOGBOOK.md
@@ -1,3 +1,15 @@
+## 2026-06-28 — 10:05 controlled cd-lane 與 legacy runner guard 分流
+
+**背景**：09:46 的 source fail-closed commit 將 `awoooi-cd-lane.service` 與 legacy runner 一起視為壓力事故路徑，導致正式 CD lane 被再次關閉；統帥要求非事故級 guard 全部轉 controlled apply。
+
+**完成內容**：
+- `scripts/reboot-recovery/awoooi-startup-110.sh` 將 legacy `act-runner` 與專用 `awoooi-cd-lane` 分流：legacy runner 仍需雙鑰匙且維持 fail-closed；cd-lane 改由 `/run/awoooi-cd-lane-enabled` 或 `AWOOOI_START_CONTROLLED_CD_LANE=1` 控制。
+- cd-lane 受控開啟前會檢查 `capacity=1`、`awoooi-ubuntu` / `awoooi-host` 窄 label、無 `ubuntu-latest` / StockPlatform / headless / Playwright label，並寫入可回滾 systemd unit（`Restart=on-failure`、CPU / Memory / Tasks 限制）。
+- `full-stack-cold-start-check.sh`、`post-start-quick-check.sh`、`p3-controlled-release-gate.sh` 改讀 `CD_LANE_CONTROLLED ok=1`，允許 cd-lane `controlled_open` 或 `failclosed`，但仍要求 legacy direct / Gitea runner units masked、legacy runner process `0`、legacy runner binary 非 ELF。
+- `AGENTS.md` 與 `docs/HARD_RULES.md` 同步新邊界：全面授權不是恢復泛用 runner，而是分流 legacy runner 與 controlled cd-lane。
+
+**下一步**：bash syntax / diff check 後 apply 到 110，恢復 cd-lane ELF 與 controlled unit，驗 `CD_LANE_CONTROLLED mode=controlled_open ok=1`、Gitea action queue 與 production API/page readback。
+
 ## 2026-06-28 — 09:35 Agent Market discovery guard 轉 AI controlled queue
 
 **背景**：統帥要求非事故級 hard gate / guard 全部打開並快速推進實作。本段針對 `agent-market-watch` 中舊 `manual_classification_required`、`needs_manual_research`、promotion review hard fail 與 operator priority gate，改成可審計的 AI controlled classification / priority queue。
diff --git a/docs/superpowers/specs/2026-04-15-MASTER-ai-autonomous-flywheel-v2.md b/docs/superpowers/specs/2026-04-15-MASTER-ai-autonomous-flywheel-v2.md
index 0abeff3f..c96f1a0d 100644
--- a/docs/superpowers/specs/2026-04-15-MASTER-ai-autonomous-flywheel-v2.md
+++ b/docs/superpowers/specs/2026-04-15-MASTER-ai-autonomous-flywheel-v2.md
@@ -5339,3 +5339,9 @@ Trigger commit `f5cd37b7` 與 deploy marker `0ba92357` 已把 governance UI 的
 - force push、刪 repo / refs、改 repo visibility、raw runtime secret volume 讀寫。
 
 **裁決：** 後續所有專案若仍把 low / medium / high 事件停在 read-only、owner gate、manual handoff、`runtime_write_gate=0` 或 `needs_human=true`，且未命中上述事故級硬阻擋，必須立即改成 AI controlled apply / verifier / rollback / learning writeback。
+
+### 2026-06-28 10:05 (台北) — 110 legacy runner 與 controlled cd-lane 分流
+
+**觸發**：110 壓力事故 fail-closed guard 將專用 `awoooi-cd-lane.service` 與 legacy / direct runner 混為同一 blocker，造成正式 CD lane 在統帥全面授權後仍被反覆關閉。
+
+**裁決：** legacy `act-runner`、direct transient runner、泛用 `ubuntu-latest` 與 StockPlatform / headless / Playwright 類重型任務仍屬容量事故保護面；專用 `awoooi-cd-lane.service` 則可在獨立 sentinel、`capacity=1`、窄 label、可回滾 unit、post-apply verifier 與 legacy runner fail-closed 同時成立時進入 `controlled_open`。所有 startup、cold-start、post-start 與 P3 release verifier 必須分開判讀 `legacy runner fail-closed` 與 `CD_LANE_CONTROLLED ok=1`，不得再用「cd-lane binary 是 ELF」作為單一硬阻擋。
diff --git a/ops/runner/README.md b/ops/runner/README.md
index 4ac2f8d1..18a569b5 100644
--- a/ops/runner/README.md
+++ b/ops/runner/README.md
@@ -397,10 +397,8 @@ Gitea service 名稱。四條 live runner 入口已改為 immutable fail-closed
 - `/home/wooo/act-runner-controlled/act_runner`
 - `/home/wooo/awoooi-controlled-runner/awoooi_controlled_runner`
 
-必須一併維持 fail-closed 的 unit 名稱；Gitea / direct runner 維持 masked，
-`awoooi-cd-lane.service` 維持 static `/bin/false` unit：
+必須一併維持 fail-closed 的 legacy unit 名稱；Gitea / direct runner 維持 masked：
 
-- `awoooi-cd-lane.service`
 - `awoooi-direct-runner-open.service`
 - `awoooi-direct-runner.service`
 - `gitea-act-runner-host.service`
@@ -408,8 +406,15 @@ Gitea service 名稱。四條 live runner 入口已改為 immutable fail-closed
 - `gitea-awoooi-controlled-runner.service`
 - `gitea-act-runner-awoooi-open.service`
 
-未完成 runner / CD lane 搬遷、限流、smoke 排程前，不得解除 mask、還原 ELF、恢復
-泛用 runner label，或把 host pressure gate 預設改成 warn-only。
+`awoooi-cd-lane.service` 是專用 controlled lane，不屬於 legacy runner mask 清單；
+只有在 `/run/awoooi-cd-lane-enabled` 或 `AWOOOI_START_CONTROLLED_CD_LANE=1`
+存在、`capacity=1`、label 僅限 `awoooi-ubuntu` / `awoooi-host`、沒有
+`ubuntu-latest` / StockPlatform / headless / Playwright 類泛用重型 label，且
+post-apply verifier 可讀回 `CD_LANE_CONTROLLED ok=1` 時，才可受控恢復。
+未滿足條件時 cd-lane 應回到 static `/bin/false` unit 與 shell stub。
+
+未完成 runner 搬遷、限流、smoke 排程前，不得解除 legacy mask、恢復泛用 runner label，
+或把 host pressure gate 預設改成 warn-only。
 
 ---
 版本: v2.0 | 更新: 2026-03-29 | 作者: Claude Code
diff --git a/scripts/reboot-recovery/awoooi-startup-110.sh b/scripts/reboot-recovery/awoooi-startup-110.sh
index ead3684c..6b2d68a0 100644
--- a/scripts/reboot-recovery/awoooi-startup-110.sh
+++ b/scripts/reboot-recovery/awoooi-startup-110.sh
@@ -194,8 +194,14 @@ RUNNER_SERVICE="gitea-act-runner-host.service"
 RUNNER_ENABLE_SENTINEL="/run/awoooi-runner-host-enabled"
 START_GITEA_RUNNER_ON_BOOT="${AWOOOI_START_GITEA_RUNNER_ON_BOOT:-0}"
 START_GITEA_RUNNER_ALLOWED=0
+CD_LANE_DIR="/home/wooo/awoooi-cd-lane"
+CD_LANE_SERVICE="awoooi-cd-lane.service"
+CD_LANE_BINARY="$CD_LANE_DIR/awoooi_cd_lane"
+CD_LANE_CONFIG="$CD_LANE_DIR/config.yaml"
+CD_LANE_ENABLE_SENTINEL="/run/awoooi-cd-lane-enabled"
+START_CONTROLLED_CD_LANE="${AWOOOI_START_CONTROLLED_CD_LANE:-0}"
+START_CD_LANE_ALLOWED=0
 RUNNER_FAIL_CLOSED_SERVICES=(
-    "awoooi-cd-lane.service"
     "awoooi-direct-runner-open.service"
     "awoooi-direct-runner.service"
     "gitea-act-runner-host.service"
@@ -204,18 +210,19 @@ RUNNER_FAIL_CLOSED_SERVICES=(
     "gitea-act-runner-awoooi-open.service"
 )
 RUNNER_FAIL_CLOSED_BINARY_PATHS=(
-    "/home/wooo/awoooi-cd-lane/awoooi_cd_lane"
     "/home/wooo/act-runner/act_runner"
     "/home/wooo/act-runner/act_runner.real-20260628-runner-pressure-guard"
     "/home/wooo/act-runner-controlled/act_runner"
     "/home/wooo/awoooi-controlled-runner/awoooi_controlled_runner"
 )
-# Commander blanket authorization: the runtime operator sentinel is now the
-# controlled-open proof for the dedicated rate-limited CD lane. The legacy env
-# var remains accepted for systemd startup compatibility.
-if [ -e "$RUNNER_ENABLE_SENTINEL" ] || [ "$START_GITEA_RUNNER_ON_BOOT" = "1" ]; then
+# Legacy host runner still needs both keys. The dedicated cd-lane has its own
+# sentinel and narrow label/capacity verifier below.
+if [ "$START_GITEA_RUNNER_ON_BOOT" = "1" ] && [ -e "$RUNNER_ENABLE_SENTINEL" ]; then
     START_GITEA_RUNNER_ALLOWED=1
 fi
+if [ -e "$CD_LANE_ENABLE_SENTINEL" ] || [ "$START_CONTROLLED_CD_LANE" = "1" ]; then
+    START_CD_LANE_ALLOWED=1
+fi
 
 mask_runner_unit_file() {
     local unit="$1"
@@ -293,6 +300,81 @@ EOF
     chattr +i "$unit_file" >/dev/null 2>&1 || true
 }
 
+cd_lane_config_is_controlled() {
+    [ -f "$CD_LANE_CONFIG" ] || return 1
+    grep -Eq '^[[:space:]]+capacity:[[:space:]]*1[[:space:]]*$' "$CD_LANE_CONFIG" || return 1
+    grep -q 'awoooi-ubuntu:docker://192.168.0.110:5000/awoooi/ci-runner:act-22.04' "$CD_LANE_CONFIG" || return 1
+    grep -q 'awoooi-host:host' "$CD_LANE_CONFIG" || return 1
+    if grep -Eq '^[[:space:]]+- ".*(ubuntu-latest|stockplatform|headless|playwright)' "$CD_LANE_CONFIG"; then
+        return 1
+    fi
+    return 0
+}
+
+ensure_cd_lane_fail_closed() {
+    systemctl kill --signal=SIGKILL "$CD_LANE_SERVICE" >/dev/null 2>&1 || true
+    systemctl stop "$CD_LANE_SERVICE" >/dev/null 2>&1 || true
+    systemctl disable "$CD_LANE_SERVICE" >/dev/null 2>&1 || true
+    install_cd_lane_fail_closed_unit
+    pkill -KILL -f "^${CD_LANE_BINARY} daemon" >/dev/null 2>&1 || true
+    guard_runner_binary_fail_closed "$CD_LANE_BINARY"
+    systemctl daemon-reload >/dev/null 2>&1 || true
+}
+
+install_controlled_cd_lane_unit() {
+    local unit_file="/etc/systemd/system/$CD_LANE_SERVICE"
+    local tmp
+    chattr -i "$unit_file" "$CD_LANE_BINARY" >/dev/null 2>&1 || true
+    tmp="$(mktemp)"
+    cat >"$tmp" <<EOF
+[Unit]
+Description=AWOOOI controlled CD lane
+After=network-online.target docker.service
+Wants=network-online.target
+Requires=docker.service
+
+[Service]
+Type=simple
+User=wooo
+WorkingDirectory=${CD_LANE_DIR}/data
+Environment=HOME=/home/wooo
+Environment=AWOOOI_CONTROLLED_RUNNER_OPEN=1
+Environment=HOST_WEB_BUILD_PRESSURE_ATTEMPTS=1
+Environment=HOST_WEB_BUILD_PRESSURE_SLEEP_SECONDS=1
+ExecStart=${CD_LANE_BINARY} daemon --config ${CD_LANE_CONFIG}
+Restart=on-failure
+RestartSec=10
+KillSignal=SIGINT
+TimeoutStopSec=3700
+SuccessExitStatus=0 130 143
+CPUQuota=250%
+MemoryHigh=8G
+MemoryMax=12G
+TasksMax=512
+
+[Install]
+WantedBy=multi-user.target
+EOF
+    install -o root -g root -m 0644 "$tmp" "$unit_file" >/dev/null 2>&1 || true
+    rm -f "$tmp"
+}
+
+ensure_controlled_cd_lane_open() {
+    if ! cd_lane_config_is_controlled; then
+        log "⛔ controlled cd-lane config 未通過 capacity/label 檢查，維持 fail-closed"
+        ensure_cd_lane_fail_closed
+        return 0
+    fi
+    if ! file "$CD_LANE_BINARY" 2>/dev/null | grep -qi "ELF"; then
+        log "⛔ controlled cd-lane binary 不是可執行 ELF，維持 fail-closed"
+        ensure_cd_lane_fail_closed
+        return 0
+    fi
+    install_controlled_cd_lane_unit
+    systemctl daemon-reload >/dev/null 2>&1 || true
+    systemctl enable --now "$CD_LANE_SERVICE" >/dev/null 2>&1 || true
+}
+
 ensure_host_runner_fail_closed() {
     local unit
     local binary
@@ -322,7 +404,6 @@ ensure_host_runner_fail_closed() {
     fi
 
     pkill -KILL -f "^${RUNNER_DIR}/act_runner(\\.real-[^ ]*)? daemon" >/dev/null 2>&1 || true
-    pkill -KILL -f "^/home/wooo/awoooi-cd-lane/awoooi_cd_lane daemon" >/dev/null 2>&1 || true
     for binary in "${RUNNER_FAIL_CLOSED_BINARY_PATHS[@]}"; do
         guard_runner_binary_fail_closed "$binary"
     done
@@ -428,6 +509,14 @@ else
     log "⚠️  找不到 act-runner binary/config: $RUNNER_DIR"
 fi
 
+if [ "$START_CD_LANE_ALLOWED" = "1" ]; then
+    log "✅ controlled cd-lane sentinel present; opening dedicated rate-limited CD lane"
+    ensure_controlled_cd_lane_open
+else
+    log "⏸️  controlled cd-lane 維持 fail-closed；需 $CD_LANE_ENABLE_SENTINEL 或 AWOOOI_START_CONTROLLED_CD_LANE=1"
+    ensure_cd_lane_fail_closed
+fi
+
 # ──────────────────────────────────────────────
 # STEP 7: Sentry（Error Tracking）
 # 2026-04-05 Claude Code: 加入 — 解決重開機後 Sentry 未自動啟動
diff --git a/scripts/reboot-recovery/full-stack-cold-start-check.sh b/scripts/reboot-recovery/full-stack-cold-start-check.sh
index 669318ab..9fa0eebf 100755
--- a/scripts/reboot-recovery/full-stack-cold-start-check.sh
+++ b/scripts/reboot-recovery/full-stack-cold-start-check.sh
@@ -286,24 +286,50 @@ echo "ACTION_RUNNER_ENABLED_COUNT $(systemctl list-unit-files "actions.runner.*"
 for u in $(systemctl list-units "actions.runner.*" --all --no-legend --plain 2>/dev/null | awk "{print \$1}"); do
   systemctl show "$u" -p ActiveState -p SubState -p CPUQuotaPerSecUSec -p MemoryMax -p WatchdogUSec -p NRestarts | sed "s/^/RUNNER $u /"
 done
-for u in awoooi-cd-lane.service awoooi-direct-runner-open.service awoooi-direct-runner.service gitea-act-runner-host.service gitea-act-runner-awoooi-controlled.service gitea-awoooi-controlled-runner.service gitea-act-runner-awoooi-open.service; do
+for u in awoooi-direct-runner-open.service awoooi-direct-runner.service gitea-act-runner-host.service gitea-act-runner-awoooi-controlled.service gitea-awoooi-controlled-runner.service gitea-act-runner-awoooi-open.service; do
   load=$(systemctl show "$u" -p LoadState --value 2>/dev/null || true)
   unitfile=$(systemctl show "$u" -p UnitFileState --value 2>/dev/null || true)
   active=$(systemctl show "$u" -p ActiveState --value 2>/dev/null || true)
   mainpid=$(systemctl show "$u" -p MainPID --value 2>/dev/null || true)
-  execstart=$(systemctl show "$u" -p ExecStart --value 2>/dev/null || true)
   unit_ok=0
   if [ "$load" = "masked" ] && [ "$unitfile" = "masked" ] && [ "$active" = "inactive" ]; then
     unit_ok=1
   fi
-  if [ "$u" = "awoooi-cd-lane.service" ] && [ "$active" = "inactive" ] && echo "$execstart" | grep -q "/bin/false"; then
-    unit_ok=1
-  fi
   echo "RUNNER_FAILCLOSED_UNIT $u load=$load unitfile=$unitfile active=$active mainpid=$mainpid ok=$unit_ok"
 done
-direct_runner_count=$(pgrep -f "^/home/wooo/awoooi-cd-lane/awoooi_cd_lane|^/home/wooo/act-runner/act_runner|^/home/wooo/act-runner-controlled/act_runner|^/home/wooo/awoooi-controlled-runner/awoooi_controlled_runner" 2>/dev/null | wc -l | tr -d " ")
+cd_lane_load=$(systemctl show awoooi-cd-lane.service -p LoadState --value 2>/dev/null || true)
+cd_lane_unitfile=$(systemctl show awoooi-cd-lane.service -p UnitFileState --value 2>/dev/null || true)
+cd_lane_active=$(systemctl show awoooi-cd-lane.service -p ActiveState --value 2>/dev/null || true)
+cd_lane_mainpid=$(systemctl show awoooi-cd-lane.service -p MainPID --value 2>/dev/null || true)
+cd_lane_execstart=$(systemctl show awoooi-cd-lane.service -p ExecStart --value 2>/dev/null || true)
+cd_lane_sentinel=missing
+[ -e /run/awoooi-cd-lane-enabled ] && cd_lane_sentinel=present
+cd_lane_capacity_ok=0
+cd_lane_labels_ok=0
+if grep -Eq "^[[:space:]]+capacity:[[:space:]]*1[[:space:]]*$" /home/wooo/awoooi-cd-lane/config.yaml 2>/dev/null; then
+  cd_lane_capacity_ok=1
+fi
+if grep -q "awoooi-ubuntu:docker://192.168.0.110:5000/awoooi/ci-runner:act-22.04" /home/wooo/awoooi-cd-lane/config.yaml 2>/dev/null \
+  && grep -q "awoooi-host:host" /home/wooo/awoooi-cd-lane/config.yaml 2>/dev/null \
+  && ! grep -Eq "^[[:space:]]+- \".*(ubuntu-latest|stockplatform|headless|playwright)" /home/wooo/awoooi-cd-lane/config.yaml 2>/dev/null; then
+  cd_lane_labels_ok=1
+fi
+cd_lane_binary_kind=$(file -b /home/wooo/awoooi-cd-lane/awoooi_cd_lane 2>/dev/null || echo missing)
+cd_lane_binary_elf=0
+echo "$cd_lane_binary_kind" | grep -qi "ELF" && cd_lane_binary_elf=1
+cd_lane_ok=0
+cd_lane_mode=blocked
+if [ "$cd_lane_active" = "inactive" ] && echo "$cd_lane_execstart" | grep -q "/bin/false" && [ "$cd_lane_binary_elf" = "0" ]; then
+  cd_lane_ok=1
+  cd_lane_mode=failclosed
+elif [ "$cd_lane_sentinel" = "present" ] && [ "$cd_lane_active" = "active" ] && [ "$cd_lane_capacity_ok" = "1" ] && [ "$cd_lane_labels_ok" = "1" ] && [ "$cd_lane_binary_elf" = "1" ]; then
+  cd_lane_ok=1
+  cd_lane_mode=controlled_open
+fi
+echo "CD_LANE_CONTROLLED mode=$cd_lane_mode load=$cd_lane_load unitfile=$cd_lane_unitfile active=$cd_lane_active mainpid=$cd_lane_mainpid sentinel=$cd_lane_sentinel capacity=$cd_lane_capacity_ok labels=$cd_lane_labels_ok binary_elf=$cd_lane_binary_elf ok=$cd_lane_ok"
+direct_runner_count=$(pgrep -f "^/home/wooo/act-runner/act_runner|^/home/wooo/act-runner-controlled/act_runner|^/home/wooo/awoooi-controlled-runner/awoooi_controlled_runner" 2>/dev/null | wc -l | tr -d " ")
 echo "RUNNER_DIRECT_PROCESS_COUNT $direct_runner_count"
-for p in /home/wooo/awoooi-cd-lane/awoooi_cd_lane /home/wooo/act-runner/act_runner /home/wooo/act-runner/act_runner.real-20260628-runner-pressure-guard /home/wooo/act-runner-controlled/act_runner /home/wooo/awoooi-controlled-runner/awoooi_controlled_runner; do
+for p in /home/wooo/act-runner/act_runner /home/wooo/act-runner/act_runner.real-20260628-runner-pressure-guard /home/wooo/act-runner-controlled/act_runner /home/wooo/awoooi-controlled-runner/awoooi_controlled_runner; do
   kind=$(file -b "$p" 2>/dev/null || echo missing)
   echo "RUNNER_FAILCLOSED_BINARY $p kind=$kind"
   echo "$kind" | grep -qi "ELF" && echo "RUNNER_FAILCLOSED_BINARY_ELF $p"
@@ -332,11 +358,12 @@ docker ps --format "DOCKER {{.Names}}\t{{.Status}}" | head -120
     warn "runner watchdog state not confirmed"
   fi
   if awk '$1 == "RUNNER_FAILCLOSED_UNIT" && $NF != "ok=1" {bad=1} END {exit bad}' <<<"$out"; then
-    ok "110 direct runner/CD lane units are fail-closed"
+    ok "110 legacy direct/Gitea runner units are fail-closed"
   else
-    fail "110 direct runner/CD lane units are not fail-closed"
+    fail "110 legacy direct/Gitea runner units are not fail-closed"
   fi
-  grep -q "RUNNER_DIRECT_PROCESS_COUNT 0" <<<"$out" && ok "110 direct runner/CD lane process count is zero" || fail "110 direct runner/CD lane process detected"
+  grep -q "CD_LANE_CONTROLLED .*ok=1" <<<"$out" && ok "110 controlled cd-lane is safe or fail-closed" || fail "110 controlled cd-lane is neither safe-open nor fail-closed"
+  grep -q "RUNNER_DIRECT_PROCESS_COUNT 0" <<<"$out" && ok "110 legacy direct runner process count is zero" || fail "110 legacy direct runner process detected"
   grep -q "RUNNER_FAILCLOSED_BINARY_ELF" <<<"$out" && fail "110 runner fail-closed binary path restored to ELF" || ok "110 runner binary paths are fail-closed stubs or missing"
   grep -q "sentry-self-hosted-clickhouse-1.*Restarting" <<<"$out" && warn "Sentry ClickHouse restarting" || ok "Sentry ClickHouse not visibly restarting"
 }
diff --git a/scripts/reboot-recovery/p3-controlled-release-gate.sh b/scripts/reboot-recovery/p3-controlled-release-gate.sh
index 14f6a94f..67a40e3f 100755
--- a/scripts/reboot-recovery/p3-controlled-release-gate.sh
+++ b/scripts/reboot-recovery/p3-controlled-release-gate.sh
@@ -306,25 +306,51 @@ check_runner_guardrails() {
   local out bad
 if ! out=$(ssh_cmd "wooo@192.168.0.110" '
 bad=0
-for u in awoooi-cd-lane.service awoooi-direct-runner-open.service awoooi-direct-runner.service gitea-act-runner-host.service gitea-act-runner-awoooi-controlled.service gitea-awoooi-controlled-runner.service gitea-act-runner-awoooi-open.service; do
+for u in awoooi-direct-runner-open.service awoooi-direct-runner.service gitea-act-runner-host.service gitea-act-runner-awoooi-controlled.service gitea-awoooi-controlled-runner.service gitea-act-runner-awoooi-open.service; do
   load=$(systemctl show "$u" -p LoadState --value 2>/dev/null || true)
   unitfile=$(systemctl show "$u" -p UnitFileState --value 2>/dev/null || true)
   active=$(systemctl show "$u" -p ActiveState --value 2>/dev/null || true)
-  execstart=$(systemctl show "$u" -p ExecStart --value 2>/dev/null || true)
   unit_ok=0
   if [ "$load" = "masked" ] && [ "$unitfile" = "masked" ] && [ "$active" = "inactive" ]; then
     unit_ok=1
   fi
-  if [ "$u" = "awoooi-cd-lane.service" ] && [ "$active" = "inactive" ] && echo "$execstart" | grep -q "/bin/false"; then
-    unit_ok=1
-  fi
   echo "RUNNER_FAILCLOSED_UNIT $u load=$load unitfile=$unitfile active=$active ok=$unit_ok"
   [ "$unit_ok" = "1" ] || bad=1
 done
-direct_runner_count=$(pgrep -f "^/home/wooo/awoooi-cd-lane/awoooi_cd_lane|^/home/wooo/act-runner/act_runner|^/home/wooo/act-runner-controlled/act_runner|^/home/wooo/awoooi-controlled-runner/awoooi_controlled_runner" 2>/dev/null | wc -l | tr -d " ")
+cd_lane_load=$(systemctl show awoooi-cd-lane.service -p LoadState --value 2>/dev/null || true)
+cd_lane_unitfile=$(systemctl show awoooi-cd-lane.service -p UnitFileState --value 2>/dev/null || true)
+cd_lane_active=$(systemctl show awoooi-cd-lane.service -p ActiveState --value 2>/dev/null || true)
+cd_lane_execstart=$(systemctl show awoooi-cd-lane.service -p ExecStart --value 2>/dev/null || true)
+cd_lane_sentinel=missing
+[ -e /run/awoooi-cd-lane-enabled ] && cd_lane_sentinel=present
+cd_lane_capacity_ok=0
+cd_lane_labels_ok=0
+if grep -Eq "^[[:space:]]+capacity:[[:space:]]*1[[:space:]]*$" /home/wooo/awoooi-cd-lane/config.yaml 2>/dev/null; then
+  cd_lane_capacity_ok=1
+fi
+if grep -q "awoooi-ubuntu:docker://192.168.0.110:5000/awoooi/ci-runner:act-22.04" /home/wooo/awoooi-cd-lane/config.yaml 2>/dev/null \
+  && grep -q "awoooi-host:host" /home/wooo/awoooi-cd-lane/config.yaml 2>/dev/null \
+  && ! grep -Eq "^[[:space:]]+- \".*(ubuntu-latest|stockplatform|headless|playwright)" /home/wooo/awoooi-cd-lane/config.yaml 2>/dev/null; then
+  cd_lane_labels_ok=1
+fi
+cd_lane_binary_kind=$(file -b /home/wooo/awoooi-cd-lane/awoooi_cd_lane 2>/dev/null || echo missing)
+cd_lane_binary_elf=0
+echo "$cd_lane_binary_kind" | grep -qi "ELF" && cd_lane_binary_elf=1
+cd_lane_ok=0
+cd_lane_mode=blocked
+if [ "$cd_lane_active" = "inactive" ] && echo "$cd_lane_execstart" | grep -q "/bin/false" && [ "$cd_lane_binary_elf" = "0" ]; then
+  cd_lane_ok=1
+  cd_lane_mode=failclosed
+elif [ "$cd_lane_sentinel" = "present" ] && [ "$cd_lane_active" = "active" ] && [ "$cd_lane_capacity_ok" = "1" ] && [ "$cd_lane_labels_ok" = "1" ] && [ "$cd_lane_binary_elf" = "1" ]; then
+  cd_lane_ok=1
+  cd_lane_mode=controlled_open
+fi
+echo "CD_LANE_CONTROLLED mode=$cd_lane_mode load=$cd_lane_load unitfile=$cd_lane_unitfile active=$cd_lane_active sentinel=$cd_lane_sentinel capacity=$cd_lane_capacity_ok labels=$cd_lane_labels_ok binary_elf=$cd_lane_binary_elf ok=$cd_lane_ok"
+[ "$cd_lane_ok" = "1" ] || bad=1
+direct_runner_count=$(pgrep -f "^/home/wooo/act-runner/act_runner|^/home/wooo/act-runner-controlled/act_runner|^/home/wooo/awoooi-controlled-runner/awoooi_controlled_runner" 2>/dev/null | wc -l | tr -d " ")
 echo "RUNNER_DIRECT_PROCESS_COUNT $direct_runner_count"
 [ "$direct_runner_count" = "0" ] || bad=1
-for p in /home/wooo/awoooi-cd-lane/awoooi_cd_lane /home/wooo/act-runner/act_runner /home/wooo/act-runner/act_runner.real-20260628-runner-pressure-guard /home/wooo/act-runner-controlled/act_runner /home/wooo/awoooi-controlled-runner/awoooi_controlled_runner; do
+for p in /home/wooo/act-runner/act_runner /home/wooo/act-runner/act_runner.real-20260628-runner-pressure-guard /home/wooo/act-runner-controlled/act_runner /home/wooo/awoooi-controlled-runner/awoooi_controlled_runner; do
   kind=$(file -b "$p" 2>/dev/null || echo missing)
   echo "RUNNER_FAILCLOSED_BINARY $p kind=$kind"
   echo "$kind" | grep -qi "ELF" && bad=1
@@ -346,7 +372,7 @@ echo "BAD_RUNNER_GUARDRAILS $bad"
     return
   fi
   echo "$out"
-  grep -q "BAD_RUNNER_GUARDRAILS 0" <<<"$out" && ok "runner/CD lane fail-closed guardrails complete" || blocked "runner/CD lane guardrails incomplete"
+  grep -q "BAD_RUNNER_GUARDRAILS 0" <<<"$out" && ok "legacy runner fail-closed and controlled cd-lane guardrails complete" || blocked "legacy runner / controlled cd-lane guardrails incomplete"
 }
 
 check_job_containers() {
diff --git a/scripts/reboot-recovery/post-start-quick-check.sh b/scripts/reboot-recovery/post-start-quick-check.sh
index b9b560b8..b93dbdcf 100755
--- a/scripts/reboot-recovery/post-start-quick-check.sh
+++ b/scripts/reboot-recovery/post-start-quick-check.sh
@@ -538,24 +538,50 @@ fi
 section "110 runner fail-closed guard"
 runner_tmp="$(mktemp -t post-start-runner.XXXXXX)"
 if ssh_read "wooo@192.168.0.110" '
-for u in awoooi-cd-lane.service awoooi-direct-runner-open.service awoooi-direct-runner.service gitea-act-runner-host.service gitea-act-runner-awoooi-controlled.service gitea-awoooi-controlled-runner.service gitea-act-runner-awoooi-open.service; do
+for u in awoooi-direct-runner-open.service awoooi-direct-runner.service gitea-act-runner-host.service gitea-act-runner-awoooi-controlled.service gitea-awoooi-controlled-runner.service gitea-act-runner-awoooi-open.service; do
   load=$(systemctl show "$u" -p LoadState --value 2>/dev/null || true)
   unitfile=$(systemctl show "$u" -p UnitFileState --value 2>/dev/null || true)
   active=$(systemctl show "$u" -p ActiveState --value 2>/dev/null || true)
   mainpid=$(systemctl show "$u" -p MainPID --value 2>/dev/null || true)
-  execstart=$(systemctl show "$u" -p ExecStart --value 2>/dev/null || true)
   unit_ok=0
   if [ "$load" = "masked" ] && [ "$unitfile" = "masked" ] && [ "$active" = "inactive" ]; then
     unit_ok=1
   fi
-  if [ "$u" = "awoooi-cd-lane.service" ] && [ "$active" = "inactive" ] && echo "$execstart" | grep -q "/bin/false"; then
-    unit_ok=1
-  fi
   echo "RUNNER_FAILCLOSED_UNIT $u load=$load unitfile=$unitfile active=$active mainpid=$mainpid ok=$unit_ok"
 done
-direct_runner_count=$(pgrep -f "^/home/wooo/awoooi-cd-lane/awoooi_cd_lane|^/home/wooo/act-runner/act_runner|^/home/wooo/act-runner-controlled/act_runner|^/home/wooo/awoooi-controlled-runner/awoooi_controlled_runner" 2>/dev/null | wc -l | tr -d " ")
+cd_lane_load=$(systemctl show awoooi-cd-lane.service -p LoadState --value 2>/dev/null || true)
+cd_lane_unitfile=$(systemctl show awoooi-cd-lane.service -p UnitFileState --value 2>/dev/null || true)
+cd_lane_active=$(systemctl show awoooi-cd-lane.service -p ActiveState --value 2>/dev/null || true)
+cd_lane_mainpid=$(systemctl show awoooi-cd-lane.service -p MainPID --value 2>/dev/null || true)
+cd_lane_execstart=$(systemctl show awoooi-cd-lane.service -p ExecStart --value 2>/dev/null || true)
+cd_lane_sentinel=missing
+[ -e /run/awoooi-cd-lane-enabled ] && cd_lane_sentinel=present
+cd_lane_capacity_ok=0
+cd_lane_labels_ok=0
+if grep -Eq "^[[:space:]]+capacity:[[:space:]]*1[[:space:]]*$" /home/wooo/awoooi-cd-lane/config.yaml 2>/dev/null; then
+  cd_lane_capacity_ok=1
+fi
+if grep -q "awoooi-ubuntu:docker://192.168.0.110:5000/awoooi/ci-runner:act-22.04" /home/wooo/awoooi-cd-lane/config.yaml 2>/dev/null \
+  && grep -q "awoooi-host:host" /home/wooo/awoooi-cd-lane/config.yaml 2>/dev/null \
+  && ! grep -Eq "^[[:space:]]+- \".*(ubuntu-latest|stockplatform|headless|playwright)" /home/wooo/awoooi-cd-lane/config.yaml 2>/dev/null; then
+  cd_lane_labels_ok=1
+fi
+cd_lane_binary_kind=$(file -b /home/wooo/awoooi-cd-lane/awoooi_cd_lane 2>/dev/null || echo missing)
+cd_lane_binary_elf=0
+echo "$cd_lane_binary_kind" | grep -qi "ELF" && cd_lane_binary_elf=1
+cd_lane_ok=0
+cd_lane_mode=blocked
+if [ "$cd_lane_active" = "inactive" ] && echo "$cd_lane_execstart" | grep -q "/bin/false" && [ "$cd_lane_binary_elf" = "0" ]; then
+  cd_lane_ok=1
+  cd_lane_mode=failclosed
+elif [ "$cd_lane_sentinel" = "present" ] && [ "$cd_lane_active" = "active" ] && [ "$cd_lane_capacity_ok" = "1" ] && [ "$cd_lane_labels_ok" = "1" ] && [ "$cd_lane_binary_elf" = "1" ]; then
+  cd_lane_ok=1
+  cd_lane_mode=controlled_open
+fi
+echo "CD_LANE_CONTROLLED mode=$cd_lane_mode load=$cd_lane_load unitfile=$cd_lane_unitfile active=$cd_lane_active mainpid=$cd_lane_mainpid sentinel=$cd_lane_sentinel capacity=$cd_lane_capacity_ok labels=$cd_lane_labels_ok binary_elf=$cd_lane_binary_elf ok=$cd_lane_ok"
+direct_runner_count=$(pgrep -f "^/home/wooo/act-runner/act_runner|^/home/wooo/act-runner-controlled/act_runner|^/home/wooo/awoooi-controlled-runner/awoooi_controlled_runner" 2>/dev/null | wc -l | tr -d " ")
 echo "RUNNER_DIRECT_PROCESS_COUNT $direct_runner_count"
-for p in /home/wooo/awoooi-cd-lane/awoooi_cd_lane /home/wooo/act-runner/act_runner /home/wooo/act-runner/act_runner.real-20260628-runner-pressure-guard /home/wooo/act-runner-controlled/act_runner /home/wooo/awoooi-controlled-runner/awoooi_controlled_runner; do
+for p in /home/wooo/act-runner/act_runner /home/wooo/act-runner/act_runner.real-20260628-runner-pressure-guard /home/wooo/act-runner-controlled/act_runner /home/wooo/awoooi-controlled-runner/awoooi_controlled_runner; do
   kind=$(file -b "$p" 2>/dev/null || echo missing)
   echo "RUNNER_FAILCLOSED_BINARY $p kind=$kind"
   echo "$kind" | grep -qi "ELF" && echo "RUNNER_FAILCLOSED_BINARY_ELF $p"
@@ -569,11 +595,12 @@ else
 fi
 cat "$runner_tmp"
 if awk '$1 == "RUNNER_FAILCLOSED_UNIT" && $NF != "ok=1" {bad=1} END {exit bad}' "$runner_tmp"; then
-  ok "110 direct runner/CD lane units are fail-closed"
+  ok "110 legacy direct/Gitea runner units are fail-closed"
 else
-  blocked "110 direct runner/CD lane units are not fail-closed"
+  blocked "110 legacy direct/Gitea runner units are not fail-closed"
 fi
-grep -q "RUNNER_DIRECT_PROCESS_COUNT 0" "$runner_tmp" && ok "110 direct runner/CD lane process count is zero" || blocked "110 direct runner/CD lane process detected"
+grep -q "CD_LANE_CONTROLLED .*ok=1" "$runner_tmp" && ok "110 controlled cd-lane is safe or fail-closed" || blocked "110 controlled cd-lane is neither safe-open nor fail-closed"
+grep -q "RUNNER_DIRECT_PROCESS_COUNT 0" "$runner_tmp" && ok "110 legacy direct runner process count is zero" || blocked "110 legacy direct runner process detected"
 grep -q "RUNNER_FAILCLOSED_BINARY_ELF" "$runner_tmp" && blocked "110 runner fail-closed binary path restored to ELF" || ok "110 runner binary paths are fail-closed stubs or missing"
 grep -q "RUNNER_PRESSURE_GATE_RC 0" "$runner_tmp" && ok "110 host pressure gate returned 0" || blocked "110 host pressure gate is blocking"
 rm -f "$runner_tmp"